Resin Driveways

Is Resin Bound Paving suitable for Vehicles?

Yes, Our Resin Bound Permeable Paving can even be designed to take heavy traffic such as in buses lanes.

Is the resin toxic?

No. Our Resin Bound Permeable Paving when laid is completely inert. With natural plant extracts making up part of the resin blend.

What makes it Permeable?

Typically Resin Bound Permeable Paving for Driveways, Paths and Patios is a fine mix aggregates of between 1-3mm and 3-6mm that is cleaned and dried, then the aggregate is mixed with our high performance UV Stable Resin. Once cured water is able to permeate through the voids within the bonded stone, without compromising the strength of the surface.

What depth is it normally laid?

This is dependant on the type of application and also the size of the aggregate. Typically for vehicular use, a depth of approximately 15-20mm is laid onto a asphalt  or concrete base, or 9-12mm for pedestrian use

Resin Driveways DIYCan I do it myself?

We recommend SUDwell DIY Resin Driveway Kits for small DIY areas. However if you are not confident we recommend that for projects larger than 25m²  you use our proffessional installation team with 18 years experience, as once it begins to set it becomes impossible to get a smooth finish.

How long will it last?

Our Resin Bound Driveways come with a 10 year guarantee, however the resin technology suggests it will last in excess of 25 years.

How long does it take to cure?

After 24 hours your Resin Bound Permeable Paving should be fully cured. But will be suitable for pedestrian traffic after just 4-6 hours and light vehicular use after 12-16 hours. During the winter these times may be longer due to the colder weather.

How do I keep it clean?

Your new Resin Bound Driveway will be very easy to look after and low maintenance. It can be cleaned with a pressure washer or simply a stiff broom. Using a light detergent such as washing up liquid you can restore the stone back to brand new.

Can I use the resin with my own aggregate?

In principle yes, However all of our stone has gone through a rigorous process of screening, cleaning, and drying, and any aggregate you supply would have to meet our minimum quality standards. If you would like any further information on this or anything else, please feel free to contact us.